SOURCE: pedal position malfunction
You can change the tps alone. You do not have to change the entire throttle body. It shouldn't be riveted in place, it should have screws or bolts on one side or the other. If it's riveted in place, use a dremmel and grind the rivets off. You can replace rivets with screws on the new unit.
SOURCE: P2135 CODE throttle/pedal position sensor/switch
Hi,
if you feel confident in using a digital auto test meter. Disconnect the sensor, and check the value range with the test meter to ensure it is within the set parameters.
However, before embarking on that task. Some ECU's will display a fault code, but will require re-setting to clear the code. With a new sensor fitted the ECU should re-set, although some "hold" the code in memory, it does not come up as a visible fault. Some vehicles can be driven a few miles, then the ECU will learn that the new sensor is within specs and will react accordingly.
SOURCE: Please help the car works fine, but after half an
the translation isnt very good but i think from the codes you need a new throttle position pedal sensor ,its the one on teh throttle pedal under the dash ,the other codes have no meaning to me as they are B codes and these would only show on a dealer diagnostic machine so iam surprissed you have managed to extract these codes ,so i assume you have visited a chinese web site to buy some of their lovely pirate software ,iam saving up for mine with the earnings from this web site
570 views
Usually answered in minutes!
×