Sarah, The Engine Coolant Temperature Sensor on your Kia is located below rad hose driver side by exhaust manifold. May be a good time to flush coolant system when changing sensor.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace Lower Engine Coolant Sensor
Coolant Flush How to Kia Sedona 2002 2005 2003 Kia Sedona EX 3 5L V6
2003 KIA sedona engine coolant temperature sensor location Google Search
SOURCE: where is the fuel filter on a 2003 kia sedona
It is located inside the fuel tank. Fortunately there is an access panel behind the drivers seat. take the cover off and then disconnect the wires and the fuel lines unscrew the flange and out it comes.
SOURCE: need to replace water pump in2005 kia sedona
The kia sedona water pump is an internal pump and needs to be replaced with timing belt service. if it is leaking, then you need to change the timing belt as well. probably not something you want to do in the back yard and will run you between 400 and 600 depending on your location and shop.
Visit my Blog
SOURCE: 2003 kia sedona o2 sensor location
The sensor is located on the pipe downstream from the engine manifold.Probably not visible unless veiwing from under the car.
SOURCE: 2005 kia sedona ECU replacement
2005 kia sedona ecu is located on passenger floor under carpet. After you remove the carpet half way, there is a silver plate you have to remove with 10mm deep well socket. there are 4 connector plugs.
942 views
Usually answered in minutes!
×