SOURCE: Flywheel bolts torque settings
Check with your local auto parts store. Or buy a repair manual
SOURCE: torque converter circuit
There is a simple fix... you can unplug it ( a shop can do that in about 1 minute or less.)
It has to be taken apart(transmission) to install a new module.. Unplugging it will get rid of the OVERdrive function.. meaning a little higher RPM at highway speeds.. but will be cheaper than a 1500+$$ job of removal and repair....
SOURCE: torgue converter circuit stuck open
youll have to take it to a transmission shop to change the torque converter lockup switch because you'll have to remove the valve body on the transmission to get to it
SOURCE: I hooked up computer on 1999 Oldsmobile Intrigue got trouble code
Go to the provided link for explanation and trouble shooting of this code, the part is called the TCC solenoid.
SOURCE: 99 dodge intrepid specs
Inner main bearing cap bolts:
Torque to 15 ft-lbs, then rotate an additional 1/4 turn
Outer main (windage tray) bearing cap bolts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn
Main bearing cap cross bolts:
Torque to 250 in-lbs or 20.83 ft-lbs
Connecting road bearing cap nuts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn
88 views
Usually answered in minutes!
×