Question about 2000 Jeep Grand Cherokee

1 Answer

How do I replace coolant sensor,

Overhead display on constant, say to check coolant level

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Why not do what it says to do?
not sure what you saw there are many coolant errors that are possible on this car.
but if RAD level low , that means ...
the side bottle (plastic expansion tank) is low.
it has a sensor there, if the coolant levle there is ok . (i bet its NOT)
then replace this sensor, or the wires fell off.
or clean it , if it fibs. clean it, and now works.

the parts are all shown in one or 2 places
the online dealer parts pages, jeep dot com
and here
lets turn to the correct page
click WJ
click

http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#serviceHow do I replace coolant sensor, - 8a2205a2-f654-4163-bffd-ee4d37a842d8.jpg

Posted on Mar 02, 2016

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: coolant level sensor bad warning comes on console

I have the same problem with my 97 Jeep. I found a fix on www.jeepforum.com posted by phild328, goodluck

Posted on May 07, 2009

Anonymous

  • 1392 Answers

SOURCE: coolant level sensor bad warning comes on console

Coolant sensor wiring would be the next place to look. Make sure connector is good, and look for broken wires.

Posted on May 31, 2009

jayberry2

  • 836 Answers

SOURCE: Low Coolant sensor is broken, causing the alert to

Find the sensor, may be in the coolant bottle, or the radiator. disconnect it, if it still stays on then ground it.

Posted on Jan 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have Silverado 1500 2001 it come up a message low coolant but the water is fine and temp; is normal, what u think it is


It could be the coolant level sensor. Is there any internal damage to reservior. Is there a loose or dirty wire connection on the side or bottom of the reservior. Is this reservoir located on passenger side near firewall?

Feb 08, 2018 | 2001 Chevrolet Silverado 1500

1 Answer

2000 cadillac deville is overheating, replaced thermostat: water pump radiator had head gaskets fixed it's saying check coolant level and it spews coolant from the overflow tank cap when hot thoughts?


Two cooling fans controlled by three relay's . If only one fan is working ,that could be a problem .
Coolant Level Sensor Description
The coolant level sensor monitors the coolant level in the cooling system and indicates if the coolant is low. This sensor is located at the base of the radiator surge tank and is not serviceable.
CHECK COOLANT LEVEL (2)
The IPC receives a discrete input from the engine coolant level switch. The engine coolant level switch is normally closed. When the engine coolant is low, the engine coolant level switch opens. When the IPC receives an open signal from the engine coolant level switch, the IPC displays the message on the DIC.

Relay Driven Dual Cooling Fan Diagnostics There are using a pontiac , by your cadillac is the same .

Mar 24, 2017 | 2000 Cadillac DeVille

1 Answer

I have a 2000 Jeep Grand Cherokee. The "add


Check bottle coolant level, if this is OK, then you muts to replace the "coolant level sensor".

I hope this helps; also, your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Oct 25, 2011 | 2000 Jeep Grand Cherokee

1 Answer

The "check coolant level" message


Hello: You didn't post what year/model car. If its 1996 or newer the coolant level sensor is located in the overflow tank. Sometimes you can tap on the tank near the sensor and it will work. Make sure the sensor is connected, not easy to get access to it. To replace the sensor you will have to replace the tank.

Jan 08, 2011 | Cadillac DeVille Cars & Trucks

2 Answers

Low coolant light stays on, coolant level is full


Check coolant level sensor, sit in the coolant resv. tank has two wire that go to it, tap on tank see if light goes off, if it don't replace sensor easy to do, part run's about $12.00 - $20.00, part # FLS609 at NAPA. Hope this was helpful.

Dec 11, 2009 | 1996 Chevrolet Cavalier

1 Answer

Vw t25 1900 petrol 1985 coolent light constantly flashes, water levels ok. doesnt overheat.


You have a coolant level sensor in your coolant reservoir. First try removing it and cleaning with an old toothbrush and some rubbing alcohol. If the problem persists replace the sensor.

Jun 16, 2009 | 1990 Volkswagen Cabriolet

1 Answer

Idles up and down after warm up


THE COOLANT LEVEL IS LOW

on the older hondas even the newer ones idle speed is coolant temp controlled.

when the engine idles up the electronic coolant temp sensor is submerged in coolant and reads warm, so the engine computer idles the car down. the coolant level if low than drops from around the coolant temp sensor and it says the engine is cold, so the engine computer idles the car up.

which results in the constant rise and fall in engine rpm.

ADD COOLANT TO THE RADIATOR AND WATCH THE CAR MAGICALLY FIX ITSELF.

Apr 10, 2009 | 1993 Honda Accord

1 Answer

How to replace a coolant level sensor, 2000 buick century


The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.

Dec 20, 2008 | 2000 Buick Century

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...