At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hey check ur abs wheel speed sensors. check data when ur moving lf rf and rears should be reading same speed. its probably gonna be a bad wheel bearing cause that where ur speed sensors are built in to. u need a abs scan tool to monitor ur wheel speed parameters in order to pin point ur bad sensor. or pull codes from ur abs module and see what side it says is failing. good luck
the brakes slows the movement of the car then the trans and engine slows with that I guess you know you have brakes on all 4 wheels by braking you are slowing down the wheels
Most likely the brake pads are bad and the drums need to be turned the magnets are not able to lock the shoes in place. You may want to adjust the brake shoes firs, if the shoes have worn down then it will not brake without an adjustment. Jack up one side at a time and turn the Star up in the slot on the back of the brake plate adjust till you feel the wheel start slightly grabbing back off one click then do other side, see if they work by pulling the trailer and using the electric brake only see if it slows down your truck when you apply the manual brake bar on front of the electric brake. Does it slow you down? Yes? then you got it fixed if no then you will have to remove the drums and see if the surface is uneven where the magnets go. hope this helps let me know if you need more information.
×