At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
How to replace a 2003 grand vitara's rear door handle
Hi, i have ordered in a rear door handle and would like step by step instructions on how to fit new door handle please. its a 2003 grand vitara. thanks emma
Re: how to replace a 2003 grand vitara's rear door handle
1. open the rear door
2. open the rear door sidings
3. try loosing the not of the handle
4. remove the steel wirings of the handle
5. install the new rear door handle
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ill open mine now.
i have no idea at all where hands are touching/? photos?
is this body trim or door trim.
chapter 9 covers this. in the book.
but ive no idea what exact part you are touching.
are is this the seals, or plastic part?
post a photo with finger pointing....
remove the cover from inside the door u will find nuts unscrew them and it will come out remember there are wire attacheds to it remove them carefully and remember which wire goes where
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls.
I had to do the same hting for my 2001 vitara
for me i had to do it from the inside of the car
i had to take of the entire panel under the rear window which was pretty much all just snaps so it was pretty easy
hi there undo the phillips screw inside the handle the gently slide the whole handle outer casing to the right about 1 cm, it will help if you push it into the door as you do it to give it a little bit of help the feed the whole mechanism through the hole in the panel hey presto!
air recirulate door problem light flashing
×