Just had a rebuilt tranny installed at about 8000 miles. Code said it was solenoid a. We replaced a and b solenoids. Didnt help it.
/D OFF Indicator
The instrument cluster receives the O/D OFF indicator status from the PCM over the communication network. When the overdrive function is turned off, the PCM sends a command to the instrument cluster to turn on the O/D OFF indicator. When a powertrain concern exists, the O/D OFF indicator flashes amber and illuminates green when overdrive is selected off. What code ? you said solenoid A -
P0750
SSA
SSA Solenoid Circuit Failure
SSA circuit failed to provide voltage drop across solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic.
No reverse gear (short) or no 4th gear (open). MIL on.
Go To Pinpoint Test A .
P0751
SSA
SSA Functional Failure (Stuck Off)
Mechanical or hydraulic failure of the shift solenoid.
Not all gears present, MIL on.
Refer to Diagnosis By Symptom .
P0752
SSA
SSA Functional Failure (Stuck On)
Mechanical or hydraulic failure of the shift solenoid.
Not all gears present, MIL on.
Refer to Diagnosis By Symptom .
P0753
SSA
SSA Solenoid Circuit Failure
SSA circuit failed to provide voltage drop across solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic.
No reverse gear (short) or no 4th gear (open). MIL off.
Go To Pinpoint Test A .
Could be a wiring problem . Did you check the solenoid A wiring circuit back to the PCM ?
1,042 views
Usually answered in minutes!
×