At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I found this - - it only shows two sensors. If you have more than two you may have to buy a shop manual from Ebay to get the factory diagrams. Photo courtesy Autozone.com
According to the wiring diagram, the sensor is a part of the Mass Air Flow meter. Pink Black is power, black white is ground, and tan - tan black - yellow go to the ECM.
There are two wires for the intake air temperature sensor.
The sensor is built into the Mass Air Flow sensor near your air filter.
Pins 5 and 6 (wire colors brown and red/blue respectively) of the MAF connector are for the air temp sensor; Pin 6 is the 5V reference voltage from the ecu, pin 5 is the return signal (ecu input).
×