Drive Cycle resets to reset the OBDII testing phases are very specialized to the year, model and engine of your car. So I can only speak generally. Start the car from fully cold and let it idle for about 15 minutes, then put the car into gear and drive it for about 5 minutes at 35 mph, then get on a highway and drive at about 60 mph for 15 minutes, come off the highway and drive around 40 mph for 3 minutes, come to a complete stop (like a stop sign) wait 30 seconds, drive off again up to 40 mph for 4 minutes - and repeat the last 2 steps (going up to 40 mph) about 3-5 times. Then repeat the last two steps going up to only 25 mph. Then come to a complete stop in your driveway and let the car idle for 10 minutes with the a/c on . After this is done, hook up a code scanner and see if it reset the modes to "ready".
If you need further help, reach me via phone at https://www.6ya.com/expert/daniel_4061c3d97c12c4c7
273 views
Usually answered in minutes!
×