Runs fine unplugged just no odometer
Wrong parts.!
the 2 sensors share the same power feed from the ECU.
5vdc ECU power reference pin. power.....
so if you plug it in and 5v goes to say 1v, then that sensor is shorted or the wrong sensor.!
the VSS can very by transmission or what transfer case you have.
not stated yet by you..
some VSS are hall sensors<(3 pins) and others are just a coil sensor 2pins,
those can not be swapped.
nor connected backwards. (halls will short)
which engine.?
which trans, m/t or a/t?
is car 4wd, or 2wd, its different,?
i can not be accurate lacking those hard facts.
91 views
Usually answered in minutes!
×