It's got fuel, spark, battery good but don't want to start?? Friends did a compression test reading was 2kpa supposed to be between 6/8. what is the problem my valves?
SOURCE: hard starting, dies when throttle opened quickly.
Sounds like a kill switch is going bad or ignition wire getting grounded along the frame or elsewhere. A bad ignition switch can do the same thing. Check the side stand kill switch if your bike has one. Check all electrical connectors. A loose or dirty connection can screw up the works.
Please rate this solution. Thanks allarismith!
SOURCE: engine died & wont start no spark ignition coil tested good
try your ignition module in the distributor much more likely. just install rebuilt distributor if that is the problem , if you just replace module the main distributor assem will **** out shortly after.
Make sure you check for broken timing belt also it is one of those two!
306 views
Usually answered in minutes!
×