- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your airconditioning system may be out of cooling gas, and if it has sufficient gas, the compressor might not pick when you put on the AC, and if the compressor did not pick ie start, you cant experience cooling effect, the fan will only be blowing.
The upper passenger side firewall has a little black line passing through it . Usually it is broken. There is also a ball on the drivers side firewall behind the hinge
check your fans there is on for the engine and one for the a/c..the a/c fan may not be working..turn a/c fan on and the fan should come on automatically.
You need to turn off the button that say AC on it. You need to change the temperature and the fan adjustment. If you have the AC button turned on, the fans will blow cool air even though the heat is turned on.
either a vent door actuator is failing or vacuum,,,or the ac is heating up cause of resricktion in ac system ,or fans are not working and ac is heating up
you may want to check on the radiator fan. The AC has its own fan and once AC is on, the fan would help bring down the temperature. It is either the fan is not blowing or has become weak. You can check on the fan by pulling out the temp sensor on the lower radiator hose. The fan should blow at full speed when doing this.
Check on the water reserve the water inside it goes down, if not there may be a leak somewhere. Water vapor may be escaping and lessening the effectiveness of the cooling system. This may be a reason why the engine cools down after the AC fan is on.
×