Question about 2008 Ford Fusion

Open Question

Need key code for radio system - 2008 Ford Fusion

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I NEED A KEY CODE FOR THE BUILT IN RADIO IN A FORD FIGO 1.4 AMBIENTE 2012 MODEL


Try this, found it on another answer board.

Press and hold the Auto button. While holding the Auto button, push and hold the Track Up button. The “_ _ _ _” will disappear after about 5 sec. Enter KCAR using the remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR” with the remote controller as described below. “K”: Press TRACK UP key (>>|) after pressing 5 key twice. “C”: Press TRACK UP key (>>|) after pressing 2 key once. “A”: Press TRACK UP key (>>|) after pressing 2 key three times. “R”: Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly. Video Unlock: Use a remote from a higher end CD Receiver or any Excelon CD Receiver. Some Video remotes will work, switch on remote must be set to AUD. Press 55222277 on the remote. There will be NO visual verification when entering the override code. Head units with a Up / Down Volume control buttons: Press and hold the Volume Up button. While holding the Volume Up button, push and hold the Disp button. The “_ _ _ _” will disappear after about 5 sec. Enter KCAR using the remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR” with the remote controller as described below. “K”: Press TRACK UP key (>>|) after pressing 5 key twice. “C”: Press TRACK UP key (>>|) after pressing 2 key once. “A”: Press TRACK UP key (>>|) after pressing 2 key three times. “R”: Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly.

Read more: How can I get the key code for ford figo radio systems? - Radio system key code ford figo :: Ask Me Fast at http://www.askmefast.com/How_can_I_get_the_key_code_for_ford_figo_radio_systems-qna4609185.html#q2909005

Dec 09, 2015 | Ford Cars & Trucks

2 Answers

My 2008 chevy uplander , had to change radio (cd player not working) now radio is locked, how can I unlock it?


Try this: How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio.
Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.
Step 4: Enter 106010 followed by the # key to direct you to the radio code retrieval system.
Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.
Step 6: Start your vehicle and turn on the radio. Using the Minute and Hour buttons, enter in the four digit radio code to your stereo system. Press the AM/FM button to unlock your stereo.
How to Unlock a GM Radio Step 1: Start the vehicle and turn on the radio. The radio will display "LOC" indicating the Theftlock system is activated.
Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don't have a fourth preset button, press and hold presets 2 and 3.) The radio will display a three digit number. Write this number down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Contact your local GM Dealer and give them the six digit code. They will give you a four digit radio code.
Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee.
Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear. Next, press the Minute button until the last two numbers of the code are displayed. Once all four digits appear, press the AM/FM button to unlock your stereo. The display will read "SEC" indicating you have successfully unlocked your radio and it is fully operational.
If radio display reads "INOP" while the vehicle is on, too many incorrect radio codes have been entered. To remove "INOP" from your display and unlock your radio, you must leave the key in the On position for one hour. Once you've retrieved your radio unlock code, write it down for future use. Your radio code will not change and having it handy will save from going from the radio code retrieval process again.

Dec 10, 2012 | 2008 Chevrolet Uplander

1 Answer

Replaced ignition switch vehicle will not start appears to be computer code


Is there a computer related code which I must enter via the radio ??? You don't enter anything through the radio !!!!! Having factory service repair info so you can read how the anti-theft system works an a scan tool to pull DTC'S - diagnostic trouble codes is the proper way to diagnose .
The theft deterrent system has been incorporated into the body control module (BCM). The theft deterrent is provided in order to prevent the vehicle operation if the correct key is not used in order to start the vehicle. The ignition key turns the lock cylinder. The cylinder rotation produces an analog voltage code in the Passlock™ sensor. This voltage code is received by the BCM. The BCM compares the voltage code to the previously learned voltage code. If the codes match, a class 2 message is sent from the BCM to the powertrain control module (PCM)/vehicle control module (VCM). The message enables the fuel injectors.
The design of the Passlock™ system is to prevent vehicle theft by disabling the engine unless the ignition lock cylinder rotates properly by engaging the correct ignition key. The system is similar in concept to the PASS-Key® system. However, the Passlock™ system eliminates the need for a key mounted resistor pellet. The components of the Passlock™ system are as follows:
• The ignition lock cylinder
• The ignition switch
• The Passlock™ sensor
• The Body control module (BCM)
• The security telltale
• The vehicle/powertrain control module (VCM/PCM)

Your best bet , take it to a qualified repair shop.

Mar 06, 2018 | 2002 Chevrolet Avalanche

2 Answers

DOES THE PASS KEY II THEFT SYSTEM NEEDS TO BE DISENGAGED THROUGH THE RADIO THEFT 4 CODE SYSTEM TO RESTORE THE FUEL SYSTEM IN 1995 OLDSMOBIL88 LSS


The Passkey anti theft system and the radio theft deterrent system are completely separate systems, so the answer is no the radio code does nothing to the Passkey. Passkey is a passive system, that is to say it disarms itself and arms itself just by inserting or removing the key from the ignition and locking the door of the car either with the key or the remote. If the Passkey is the source of any problem and is not working correctly then the Security light should be flashing in the dash to indicate a problem. The most common issue with the Passkey 1 and 2 is that the reader located in the ignition switch lock cylinder goes bad, this locks out the fuel pump and the engine will not start. The system can be bypassed but it is not easy.

Oct 15, 2011 | 1995 Oldsmobile Eighty Eight

1 Answer

I have a 1998 audi a4 with a bose audi concert system. i need to put in the security code and from what i have found you can do this by holding scan and rds at the same time then you can enter the code but...


IMPORTANT NOTE: You must have the security anti-theft code for your Audi Concert radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for 1998 Audi A4 Concert radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
Please do rate my response. Thanks!

Jan 04, 2011 | 1998 Audi A4

1 Answer

I bought a faily used jaguar s-type but the radio is showing locked 10. I need a help


I don't own an S Type so I can't try this, however Ford Radio systems apear to work the same.

You will need your unlock code for the radio, see details at http://www.bluejag.co.uk

Then with radio off press key 6 and hold while turning radio power on, continue to hold key 6. After 15 - 20 seconds the screen will say CODE release key 6 then enter your code.

May 25, 2010 | 2004 Jaguar X-Type

2 Answers

2008 VW radio code is gone i need help pleeeeease


Most of the time the radio code is written down on the inside front or rear cover of the owners manual.

If that is not the case then hopefully you will be able to get the code from a Volkswagen dealership with only the VIN number to the vehicle, otherwise you will need to remove the radio to get the serial number from that radio in order to obtain the correct code from a Volkswagen dealership.

You will need to contact a Volkswagen dealership to find out which is applicable to your vehicle, and that is also the same way that any repair shop would obtain that radio code.

May 10, 2010 | 2000 Volkswagen Beetle

1 Answer

AAA advised me to open and close door with key


Yes. Because the security system was "set". You need the code to unlock the security system for the radio. It is like that for theft pruposes. Best bet is to go to the dealership to have them reset it or figure out how to get the code for your radio.

Oct 31, 2009 | 1999 Audi A6

1 Answer

I got new battery installed and my radio won't work? Some kind of code I need to key in? Can I stop by chevy dealership and pick up the code as my son is a mechanic and can do it? Thank you


if you have older radio system where the volume buttons are small you can give me your calibration number and I can get you the code from that. to get the number, turn ignition key to on and then press and hold buttons 2 & 3 together when a number appears write it down then press am/fm to get another three numbers, write them down. get me those numbers and I can get you your code.

But if your radio is new style then you will need to get the dealer to hookup GM tech II to recalibrate your computer system. the newer system doesn't lock when battery is disconnected since it uses data to communicate, so lets hope that you have older one.

Oct 08, 2009 | 2000 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...