Diagram for serpintine belt without the ac pump

Most likely one of the things that the belt drives is frozen. Check that your water pump, power steering pump, alternator, etc all turn without the belt.

I'm not sure a bypass belt will work? Ac is number 3, at the top of engine? A bypass pulley for the ac, should work, if you can find one? Just my opinion.

https://images.search.yahoo.com/search/images;_ylt=A0LEVy.gYYZXVuoAckdXNyoA;_ylu=X3oDMTEyY3M1aWxwBGNvbG8DYmYxBHBvcwMxBHZ0aWQDVUkyQzJfMQRzZWMDc2M-?p=BANTAM+1300+ROCAM+ENGINE+belt+routing&fr=mcafee&th=98&tw=135&imgurl=http%3A%2F%2Fs3.amazonaws.com%2F2cp-images%2Fquestion_images%2F14392%2Flarge.gif&rurl=http%3A%2F%2Fwww.2carpros.com%2Fquestions%2F2003-ford-bantam-serpintine-belt-replacement-diagram&size=20KB&name=Serpintine+Belt+Replacement+Diagram%3A+How+Do+I+Replace+the+...&h=510&w=700&turl=http%3A%2F%2Fts1.mm.bing.net%2Fth%3Fid%3DOIP.Mcf090a424a71f9536d3c3dc8362d0ffao0%26pid%3D15.1%26rs%3D1%26c%3D1%26qlt%3D95%26w%3D135%26h%3D98%23inline&tt=Serpintine+Belt+Replacement+Diagram%3A+How+Do+I+Replace+the+...&sigr=12mi9bpqq&sigit=13flc1llu&sigi=11rgj1hk1&sign=11t4m3mp2&sigt=11t4m3mp2 Here are the routing patterns. Thank you David & good luck

if the pump is froze and u put a new belt on it it will burn the belt off in a matter on min, sounds like you need a new pump, can u turn the pump by hand? if not the pump needs to be replaced

SERPENTINE DRIVE BELT ROUTING DIAGRAM IS ON THE ENGINE.LOOK DOWN AROUND WATER PUMP PULLEY AREA YOU SHOULD SEE BELT DIAGRAM.IF YOU DONT SEE BELT DIAGRAM.AUTO ZONE OR ADVANCE AUTO WILL PRINT YOU ONE OUT.

http://www.focusfanatics.com/forum/showthread.php?t=43557

there you go, if you need another diagram for one without AC its in that same page, remember to use belt dressing, go slowly, and if you need one, use a belt tensioner wrench to help you slide it off, a special trick is to put the belt on the water pump pulley last, as the rounded edge is easier to slide on to, as well as making sure the belt length is correct

No, they are two separate belts. The timing belt is not visible without removing a cover.

If you have A/C look here:




Without AC:

i would have posted a picture but there are 4 choices , with a/c without a/c with air pump , and without air pump , there is always a routing picture under the hood by engine sticker , if not , heres a link that shows all choices .

95 vandura belt routings

J5

This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.

http://autorepair.about.com/library/illustrations/bl506a-lib.htm