You also should check the cabling, and the returns. The minus is supposed to go to the chassis of the car. When the connection is bad, the lights won't work. Use a multi meter to find out if the bulbs get any voltage. If not check the cabling, if yes, replace the bulb.
BULBS REQUIRED
SOURCE: 2005 Corolla LE brake lights not working
to ss1957, i have exactly the same problem as yours. At first i thought the bulbs of both side are okay because the filaments (there's two on each) are intact. It turned out that they're not. The brake lights came back as soon as I replaced the bulbs.
SOURCE: 2003 gmc envoy xl brake lights dont work
sounds like a fuse look under the dash panel for fuse cover look at the back of cover and check that fuseThanks for using fix ya Please rate my response thank you very much
SOURCE: 2003 gmc envoy xl brake lights dont work
theres usually a pressure switch behind the brake pedal, sometimes the plastic hex nut rattles loose and you have to retighten it.
SOURCE: 2005 Toyota Sienna rear brake light problem.
have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
otherwise-
Check continuity of live from center to lh & rh lights and/or is there a live at those lights
SOURCE: 2005 odyssey brake lights
all brake lights should be linked to same fuse, so fuse should be OK. check for blown globes.
55 views
Usually answered in minutes!
×