SOURCE: 2000 Dodge Caravan Serpentine Belt issue
I do have one but I have to send it to an email address, I don't know how to put diagrams on here. shoot me an email to send the diagram to. thanks Lee
SOURCE: 2000 Dodge Caravan wont start
sounds like engine is hydrolocked (cylinders full of water)
not good
SOURCE: replacing 2000 dodge caravan timing belt - how do
rotate crankshaft in a clockwise direction until both timing marks are aligned together on both camshaft gears and the crankshaft timing mark aligns with mark on the block just behind the crankshaft gear. you may need to rotate the crankshaft gear several times before you can get all the timing marks to align. once you have done this then insert a allen wrench in the hole on the belt tensioner and a small drill bit or a small allen wrench in the smaller hole. take the largr allen wrench and apply pressure counterclockwise until the small drill bit or allen wrench slides into locking hole to hold the belt tensioner in place. install belt and release the tensioner. (note: before starting work on engine remove the negative cable from battery).
SOURCE: 2000 dodge caravan key will not turn can not
The tumblers in the lock cylinder are stuck and this prevents the key from turning. Spray some lubricant into the cylinder, insert the key in and out numerous times and also hit the end of the key with a rubber hammer while it is in the cylinder and this will help to release the tumblers.
45 views
Usually answered in minutes!
×