1996 chevy blazer firing order

Firing Orders - AutoZone

www.autozone.com/.../Firing-Orders/Firing-Orders/_/P-0996b...
AutoZoneClick image to see an enlarged view ... 2.4L (4G64) DOHC engine with distributorless ignition Firing order: 1-3-4-2 Distributorless ignition system ... Mitsubishi 1996-97 3.0L (6G72) SOHC Engines Firing order: 1-2-3-4-5-6 Distributor rotation: ...Missing: blazer

when was the last tune up done on it? have you checked the spark plugs and firing order to make sure it is correct?

Check the firing order. If you took all the plug wires off at the same time, then there is the problem. Back firing out of the intake is a sure sign the firing order is wrong.

P0135 means 0xygen heater circuit malfunction, P0141 mean 02 heater circuit bank1 sensor 2 (this is catalytic monitor) P0147 means 02 heater sensor circuit bank 1 sensor 3, P0300 is random misfire. You will get all the 02 code because of the misfire correct the misfire and the 02 should correct.We will start with the plug wire and make sure the firing order is correct 1996 chevy blazer that will make it a 4.3 engine size check the firing order firing order is 165432 also check the coil (it has a tendency to short you will know if it is) make sure the distributor rotation is check

1-6-5-4-3-2 The driver side is odd and the passenger is even. front of the motor is low number cylinder going up to the firewall

1-6-5-4-3-2
heres a link to help you, good luck.
http://images.google.com/imgres?imgurl=http://www.2carpros.com/forum/automotive_pictures/170934_firing_order_1.jpg&imgrefurl=http://www.2carpros.com/forum/1998-chevy-blazer--spark-plug-wires-vt257725.html&usg=__mEuwyzlUpS9OE3hDhooTkWaPA7s=&h=260&w=278&sz=15&hl=en&start=1&um=1&tbnid=FCT3-hbHWraurM:&tbnh=107&tbnw=114&prev=/images%3Fq%3D1998%2Bchevy%2Bblazer%2Bfiring%2Border%26hl%3Den%26sa%3DN%26um%3D1

V-8=pass side cyl.2-4-6-8....drivers side cyl. 1-3-5-7....firing order 1-8-4-3-6-5-7-2....v-6= pass side 2-4-6...drivers side...1--3-5 firing order listed on top if its a flat dist cap....if round cap order is 1-2-3-4-5-6-5...good luck..Lee.

The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Firing order is 1-6-5-4-3-2. Distributor cap should be numbered. Number one cylinder is front on driver's side (3 and 5 follow on same side). Number 2 is front on passenger's side (followed by 4 and 6).

1993 chevy blazer s10 how to time it