SOURCE: procedure to repaloce rear shocks
Removal & Installation
Here are links to more diagrams. Best of luck on your repair.
Greg
http://www.chiltonlibrary.com/content/images/7922/images/7922UG21.pdf
http://www.chiltonlibrary.com/content/images/7922/images/7922UG22.pdf
SOURCE: 1991 Buick Regal 3.8L Belt Tensioner
Remove belt and unbolt center pulley bolt. I believe it's a backward theaded bolt. Turn to the right to loosen.
SOURCE: how do I replace my fuel level sensor on a 2000
Access via trunk, remove carpet and find inspection cover, remove to access fuel level sending unit which is attached to the fuel pump.
SOURCE: how to replace left front
Headlight
Removal & Installation
Bulb Replacement
CAUTION
Improper handling of a halogen bulb could cause the bulb to shatter into flying glass fragments due to the bulbs containing gas under pressure. Always wear eye protection, only handle the bulb by its base, keep dirt and moisture off the bulb, do not install the bulb with power at the socket, and keep them away from children.
To Remove:
To Install:
NOTE: If oil from your skin or anything damp comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry. Too prevent the bulb from exploding when the bulb is turned on.
Headlight Assembly
To Remove:
To Install:
146 views
Usually answered in minutes!
×