Brake lights do not work, changed bulbs and still don't work

I think your break light bulb is damage and not able to work properly so you need to change it so you can give your vehicle to mechanic to repair break light bulb.

http://www.dutchgrown.com/

IDK! Maybe the thid brake light bulb has a short in it.

Does your car have the `lamp out'indicator system? It's more complicated.
My manual shows fuse #28 , a 15 amp fuse powers the brake bulbs.Is this the one you changed?
A bulb can be out for a long time and you don't notice it,then the other burns out and you think they both went out at the same time,but they might not have,see?
So check the bulbs and make sure you got that brake switch installed correctly. don-ohio (:^)

When you say you checked the fuse, are you getting power in and out of it and the brake light switch ?

try changing the brake switch in the floor behind brake pedal.... pedal activates in when used, sending power to brake lights

That should be on two different fuses, but everything goes thru the turn signal switch.
The switch might be faulty. A mechanic would check for voltage there.

If both are not working that is a sign that you have some other problem and not burned out filament's in the bulbs bulbs. Try turning on the four way flashers and then off again a few times do the rear lights flash? if so the bulbs are ok. If the brake light still don't work check the bulb socket with a DC volt meter while the rake lights are help on by a helper, if you have voltage then likely the bulbs are the problem. If you still think the bulbs are the problem the way to change them is outlined in the owners manual with diagram's which I do not have.

Transmission slipping when changing first gear.

check the fuse .and all of the bulbs are working.if ok then change the brake switch.

checks contacts