Other three windows do not work at all, Check fuse but other things on it work fine. Master Control switch was already loose because of what held it in place broke a few months ago so I was able to unplug it and then reattach it, Nothing however I noticed the bottom of the master switch got extremely hot as I tried to roll up/down the windows. Disconnected it and the wires that were getting hot as well cooled down quickly. So is it the master control switchmy first guess or the motor inside door that is bad? Or both? How do I check? Don't want to spend money bc getting rid of it in a few months but need to get windows back up on passenger and drivers sides fronts
You can't put up the front passenger window with it's own switch ? Did you check the POWER WINDOW RELAY in the instrument panel fuse / relay box ? An you checked POWER fuse 30amp same fuse box ? All window switches have direct power from power window relay !
Fuse Block - Instrument Panel
Left of the Steering Column, behind the storage Compartment
P/W Relay
--
Sunroof Switch Assembly, Window Switch - Left Front, Window Switch - Left Rear, Window Switch - Right Front, Window Switch - Right Rear
Testimonial: "Let me double check that. I forgot to mention, I think, the power locks work fine from the master control switch Thanks"
I had a similar problem with a dodge and it turned out motor in drivers door. To get window up remove inside panel on door with window down and push bottom of window upwards while holding the up switch
1,309 views
Usually answered in minutes!
×