Question about 2005 Chevrolet Express
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Rds radio Procedure
GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
for the 6 digit code that you've written down. Enter that and press
* key. He will then give you a code, and the option to get additional
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
Posted on Oct 23, 2008
Some fuel tanks have a drain **** that will allow you to drain all of
the gas neatly. If you have a drain ****, it will be located at the
lowest point on the tank. Loosen the valve and allow the gas to
If your tank has no drain ****, you'll have to drain it by removing one of the fuel lines. The rubber hose that exits the tank at its lowest point will drain the tank fully. It will either be connected to an electric fuel pump, fuel filter, or to a hard fuel line that goes to the front of the car. Loosen the clamp on the end of the line that connects to the gas tank. Pull the hose off and allow the gas to run out of the tank into your container until it is drained completely.
Posted on Feb 07, 2009
DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.
Posted on Mar 10, 2010
Tips for a great answer:
Aug 31, 2017 | Cars & Trucks
Apr 03, 2016 | Dodge Cars & Trucks
Feb 24, 2015 | Nissan Pathfinder Cars & Trucks
Jan 12, 2013 | 2004 Chevrolet Express
Oct 28, 2010 | 1990 Chevrolet K1500
Apr 24, 2010 | 2002 Ford Mustang
Dec 24, 2009 | 2003 Ford Explorer
Mar 01, 2009 | 1995 Chevrolet C/K 2500
Sep 21, 2008 | 2002 Chevrolet Blazer
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: