At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it's a push button start that you're talking about, make sure your brake lights are coming on when it's acting up. Sometimes I've had intermittent brake on/off switches cause a no crank concern because the car doesn't know you're stepping on the brake pedal. Just have someone watch the brake lights if it acts up on you.
subaru have 2 security codes one for the key/ignition switch(magnetic code)and one for the remote(rolling electronic) the car is reccognising the key but not the remotes signal to the central locking.
try locking the car with the key then pressing and the holding the unlock button on the remote for 30 secs, see if the car unlocks.if not unlock the car etc....or... put key in door and hold over for 30 secs..etc
You need to reprogram the remote for your car. Here are the instructions http://www.cars101.com/subaru/keyless.html Hope this haelps and have a great day.
The red light on the dash has several blinking patterns, just depending on what you set if for. But no matter what setting (valet mode or armed mode) the key fob should still work for the doors. If the unlock is not working, but the lock is working your problem is in the remote. If you open it up you will find that the rubber peice that makes contact with the board is broken. The remotes will need to be replaced, which is covered under the factory wrty. If the lock and unlock does not work at all then there is a programming issue, the dealer can reprogram the remotes for you. The reprogramming has to be done by the dealer. they have to hook up a lap top and program the remotes. The older models could be done easily.
×