- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
p0339 is crank shaft position sensor related error. you need to be sure that its wiring is not damaged and it is not shorted somehow. if it is broken or getting broken, car may stall, or wont start att all.
p0113 is for intake air tempoerature sensor errors. that sensor measures air ehich enters the engine. it is least important. its effect may not be noticable when weather is not extremely cold.
p0334 is for knock sensor on engine. it prevent predetonation due to ignition conditions appear. it is felt when engine is under load like climbing, and engine speed is low. check for wires if it is ok replace sensor.
we can tell that temperature sensor is not directly effects other sensors. but knock sensor and crank position sensor is to important for engine. if you have no starting issues, even cold or warm engine, invest on knock sensor first.
I THINK YOU WILL FIND THE CLUTCH BEARING IN THE FRNT OF THE COM PRESSOR HAS HAD IT .800-900 DOLLARS SOUNDS LIKE AREBUILT EX CHANGE UNIT OR POSSIBLY ANEW ONE ,I WOULD LOOK AROUND FOR SOMEONE TO JUST FIT ANEW BEARING. IT CAN BE DONE THE OLDER TOYOTAS AS I HAVE DONE IT BUT THEY ARE RIGHT IN SAYING YOU CANT LEAVE IT "YOUDOIT"
i havnt worked on a 2004 but all the hondas i worked on the starter was on top of the trans runing inline with the valve cover on the 4 cyl i dont know what motor you have hope this helps some
Take it to a Honda Dealer, if it is out of warranty coverage, they will have to have it sent out for repair. May cost between $250 to $350, plus tech labor ro remove and reinstall.
If you have a "Honda Care" extended service (warranty) contract, they fix it for much cheaper.
A 41 error is your throttle positioning sensor, its a electrical sensor hooked to your injectors telling them how much gas/air to be releasing as u accelerate/deccelerate. Best and only way to fix it is to buy a new sensor. Then reset the cars computer at a diagnostics shop for little or no cost.
×