How do I install a new serpentine belt on a 1993 Dodge Caravan. I need a diagram I can print out please.
SOURCE: 2000 Dodge Caravan Serpentine Belt issue
I do have one but I have to send it to an email address, I don't know how to put diagrams on here. shoot me an email to send the diagram to. thanks Lee
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: 1993 DODGE CARAVAN SERPENTINE BELT DIAGRAM
Link for a 99 - 3.3.L, but diagram should be same. Scroll down to figure 11 when you click on this link.
http://www.autozone.com/addVehicleId,2546504/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c1528003c186
SOURCE: need diagram for replacing serpentine belt on 2000 dodge caravan
I need to know which motor you have.
After you let me know, I will go to this website to find your answer:
http://www.autozone.com/N,316192/shopping/vehicleSelect4.htm
SOURCE: need serpentine belt diagram for 1994 dodge grand caravan
if you buy your belt from Autozone the belt routing is on the box
Accessory drive belt adjustment-3.3L and 3.8L engines
Click to Enlarge
All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner.
Raise the front of the vehicle and safely support it with jackstands.
Remove the right front splash shield.
Release tension by rotating the tensioner clockwise.
Remove the belt and install a replacement.
Proper belt tension is maintain by the dynamic tension.
Install the right front splash shield. Lower the front of the vehicle.
551 views
Usually answered in minutes!
×