Question about 1999 Chevrolet K1500

1 Answer

2004 chev 4x4 not working put in new switch & mtr still not working

Posted by on

  • genisis98 Feb 26, 2015

    Hi ken elliott, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Which switch did you replace, the one on the dash 4X4 hi/low or ?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Chevrolet Expert
  • 182 Answers

Check the switch in the front end,,,,screws in the side of the pumpkin,,,the diff,,,,think its a 32mm wrench size?????remove it ,,plug it back up to factory wires, ,,,,may need to groung it to side of frontend or metal surface,,,turn key on ,,, turn 4x4 switch to 4wd,, see if it extends out about 1.5"?? or so,,,they used compressed gas heated to move in and out,,,check your wires on the transfer case to,, for good conection

Posted on Mar 07, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the drl module located on a 1998 chev silverado 4x4


Under the dash behind the main headlight switch.

Oct 11, 2012 | Cars & Trucks

1 Answer

1999 chev 1500 4x4 new rebuilt trans won't move after 5 minutes


Well see whats wrong with it or cheak on google see what comes up he answer if my information aint helping you or go to a shop like morrisons

Jun 18, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

My 1997 Chev 4x4 when I put into 4 wheel drive on the fly it won't switch over so when I stop and put it into 4 wheel it grinds. Any idea what cause this?


You need to do a clutch adjustment on your 4x4.
The tranny sincros are still spinning due to a needed adjustment or a warped flywheel.

Nov 25, 2010 | Chevrolet 1500 Cars & Trucks

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

1 Answer

1997 chev tahoe 5.7 4x4.no ignition or fuel pressure.Flashed new reman ecm but wont work.


sounds like the anti theft system? make sure you get it checked these had problems with broken wires at the igntion switch in the sterring coulmn

Aug 31, 2009 | 1997 Chevrolet Tahoe

2 Answers

What is the front axle on a 2004 dodge 2500hd 4x4


AAM is american axle manfactur its is equal to say a dana 60 that was use in dodge chev ford truck for years you could find out more buy goggleing it

Jul 31, 2009 | 2004 Dodge Ram 2500

1 Answer

1994 ford ranger 4.0 4x4 supercab


My wife just recently had a similar problem. She got stuck in the mud and put our 2004 F150 in 4x4 Low to get out. She didn't. Had to have AAA pull her out. She then left a bit later and the truck was still in 4x4 Low even after switching to 2WD. She even tried going backwards to get it to switch. So she called me frantically and I said I'd call her back. So I called our local Ford Repair shop and he gave me these instructions (loosely based on what the owner's manual says to do)

1. Start Vehicle
2. Switch to 4x4 Low
3. Put in Neutral
4. Switch to 4x4 High
5. Go in Reverse for a bit and then Forward a bit again
(You should now be in 4x4 High)
6. Put in Neutral
7. Switch to 2WD
You should now be good. If that didn't work, then try repeating step 5 after step 7.

Hope that helps, as it worked for us.

Feb 22, 2009 | 1994 Ford Ranger Supercab

3 Answers

2004 Sport Trac stuck 4x4 low


Start the vehicle put the 4x4 switch to the position the light on the dash states it is in. then put it in nuetral, hold your foot on the brake switch the 4x4 switch back to 2wd wait a few seconds and the light on the dash should switch back to 2wd. and you should be back in 2wd

Sep 04, 2008 | 2004 Ford Explorer Sport Trac

2 Answers

1985 chev S-10 4x4 6 cylinder pickup having starting problems


Check your electonic ignition swith under dash that the ignition acuator rod connects to about $8 part at parts store

Aug 12, 2008 | 1985 Chevrolet Chevy

Not finding what you are looking for?
1999 Chevrolet K1500 Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...