Thought I did it all right gaskets RTV high temp around the water and then gasket then a little more on the top gasket by the water inlets. Maybe the longer bolts maid a difference if I got them a little off?
SOURCE: intake valve gasket leaking how do i replace
He must have meant the intake manifold gasket. That is a complex job, but can be done if you have basic knowledge of mechanics and a few hand tools. Best advice is to get a haynes repair manual from an auto parts store as it will have step by step instructions and photos. Good luck. Dont forget to rate.
SOURCE: 1995 Buick Park AV intake manifold gasket starting to leak
THIS IS VERY COMMEN IN FACT JUST ABOUT EVERY SINGLE 3.1AND 3.4 AND 3.8 EVER MADE BY CHEVY LEAKS AT THE LOWER INTAKE ALL OF THEM AND USEALLY STARTS AT ABOUT 50000 MILES THE PARTS COST ABOUT 300.00 AT THE DEALER FOR NEW GASKETS AND COOLENT AND SEALENT ALL THE PARTS YOU WILL NEED THE PROBLEM IS ITS ABOUT A SIX HOUR JOB SO THE LABOR KILLS YA BUT IT IS ALOT OF WORK BUT THE GOOD PART IS THERE IS NO NEED TO REMOVE THE PUSH RODS ON A 3.8 LIKE YOU DO ON A 3.4 I CAN GIVE YOU THE STEPS IF YOU LIKE BUT THIS JOB IS BEST TO SEND TO A MECHANIC AS IT HAS A LOT OF LITTLE THINGS THAT MUST BE DONE OR YOU CAN MAKE A BIGGER MESS THEN YOU GOT ALREADY... HOPE THIS WAS HELP FULL LET ME NO IF YOU NEED MORE INFO
SOURCE: How to install intake manifold gaskets and their location.
go to autozone.com and register free then select make year ect.
select repair info (you have to register 4 this)
step by step and photos!!!!
SOURCE: 1995 3.8 oil leak at oil filter area still leaks
have you checked the pcv valve and hose to see if motor vacuum is venting the pressure if not press. will build - could be causing your gasket leak problem?
SOURCE: ANTI-FREEZE LEAK AT INTAKE/PLENUM MANIFOLD.
Not alot you can do but remove the intake plenum and have the gasket replaced.
57 views
Usually answered in minutes!
×