We try to get snow off the wipers and the wipers don't work
It is under the dash panel right hand side , kick panel ? Fuse F1.1 10amp . an fuse F1.113 30 amp.
Visual Inspection Chart
Mechanical
Electrical
PINPOINT TEST A: THE WINDSHIELD WIPERS ARE INOPERATIVE
Test Step
Result / Action to Take
A1 CHECK CIRCUITS 65 (DG) AND 1002 (BK/PK) FOR VOLTAGE
Yes
GO to A2 .
No
REPAIR the circuit(s) in question. TEST the system for normal operation.
A2 CHECK CIRCUITS 57 (BK) AND 875 (BK/LB) FOR OPENS
Yes
GO to A3 .
No
REPAIR the circuit(s) in question. TEST the system for normal operation.
A3 CHECK THE MULTIFUNCTION SWITCH
Yes
GO to A4 .
No
INSTALL a new multifunction switch. REFER to Section 211-05 .
A4 CHECK CIRCUIT 57 (BK) FOR OPEN
Yes
GO to A5 .
No
REPAIR the circuit. TEST the system for normal operation.
A5 CHECK CIRCUITS 56 (DB/OG), 58 (WH), 61 (YE/RD), AND 63 (RD) FOR OPENS
Yes
Multifunction Switch C202a
Windshield Wiper Motor C125
pin 7, circuit 56 (DB/OG)
pin 10, circuit 56 (DB/OG)
pin 3, circuit 58 (WH)
pin 11, circuit 58 (WH)
pin 5, circuit 61 (YE/RD)
pin 1, circuit 61 (YE/RD)
pin 1, circuit 63 (RD)
pin 9, circuitwhere is the fuse box for the wipers - s3j~tr~en~file=a0045221.gif~gen~ref.gifr>
GO to A6 .
No
REPAIR the circuit(s) in question. TEST the system for normal operation.
A6 CHECK FOR CORRECT WIPER MOTOR OPERATION
Yes
GO to A7 .
No
The system is operating correctly at this time. Concern may have been caused by a loose or corroded connector. TEST the system for normal operation.
A7 CHECK THE WINDSHIELD WIPER MOTOR
Yes
The system is operating correctly at this time. Concern may have been caused by binding or incorrect pivot arm adjustment. REFER to Windshield Wiper Blade and Pivot Arm Adjustment in this section. TEST the system for normal operation.
No
INSTALL a new windshield wiper motor. REFER to Windshield Wiper Motor in this section.
Hope this helps !
Fuse box is underneath the dashboard on the driver side down on the side.
494 views
Usually answered in minutes!
×