The two pullies move back and forth can u tighten the unit back down
1993 3.2l Gas V6 engines, right>? double posted too.
the torque page is clear, read that yet, seem not.
seem 123 is correct, but
2.8L V6, GM
3.1L v6 GM
or 3.3L V6 Isuzu.
as you can see there are 3 , V6 engines.
an not posted yet, even second post.
above poster used 4 cyl engine and is wrong. BILL
now answered, 2 twice,
before working on any engine, know whats there first.
and win.
There should be a bolts that screw into the end of the crank shaft that holds the pulleys on
the torque required is 87-90 ft lbs
245 views
Usually answered in minutes!
×