Question about 2001 Cadillac Catera

1 Answer

How to replace oil; cooler on this year - 2001 Cadillac Catera

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

  • Service and Repair
Oil Cooler Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Vehicle Lifting.
  2. Drain the engine oil and remove the oil filter housing.
how to replace oil; cooler on this year - 89116492

  1. Loosen the oil cooler outlet (1) and the inlet (2) lines from the engine block.
  2. Lower the vehicle.
  3. Remove the intake plenum.
  4. Remove the intake manifold.
how to replace oil; cooler on this year - 89116493c="/uploads/images/89116493" alt="89116493" class="h_mi" />

  1. Disconnect the following electrical connectors from the water crossover:
    • The engine coolant temperature sender (2)
    • The engine coolant tempehow to replace oil; cooler on this year - 84936658ensor (4)
84936658

  1. Remove the water crossover bolts (1).
  2. Remove the water crossover upper and lower seals (2).
84942881

  1. Loosen the upper heat shield bolts on the left side of the exhaust manifold.
89116496

  1. Remove the oil cooler inlet line fhow to replace oil; cooler on this year - 84972057engine oil cooler.
84942883

  1. Note the positioning of the 4 seals.
84972057

  1. Phow to replace oil; cooler on this year - 84942883the oil feed and return,lines out of the way and secure with mechanic wire.
  2. Remove the engine oil cooler, inlet and outlet nuts (1).
  3. Remove the engine oil cooler cover bolts (2).
84942883

  1. Remove the engine oil cooler cover.
  2. Remove the engine oil cooler.
  3. Clean all sealing surfaces.
Installation Procedure
84972056

  1. Apply a 2 mm (0.08 inch) bead of RTV silicone sealant, GM P/N 12346240, in the groove around the engine oil cooler cover.
  2. Install the engine oil cooler cover.
Notice: Refer to Fastener Notice in Service Precautions.
84972057

  1. Install the engine oil cooler cover bolts (2). Tighten the engine oil cooler cover bolts to 30 Nm (22 ft. lbs.).
  2. Install the engine oil cooler inlet and outlet nuts (1). Tighten the engine oil cooler inlet and outlet nuts to 20 Nm how to replace oil; cooler on this year - 84936658lbs.).
  3. Reposition the oil feed and return lines.
84942883

  1. Install the oil cooler outlet and install the oil cooler inlet lines to the engine oil cooler. Use 4 new seals.
Tighten the oil feed and return lines to 30 Nm (22 ft. lbs.).
84936658

  1. Install the water crossover:
    • Position the crossover.
    • Install the upper and lower seals (2).
    • Install the water crossover bolts (1). Tighten
Tighten the water crossover bolts to 30 Nm (22 ft. lbs.).
  1. Connect the electrical connectors at the following locations:
    • The engine coolant tehow to replace oil; cooler on this year - 89116492e sensor (4)
    • The engine coolant temperature sender (2)
  1. Install the intake manifold.
  2. Install the intake plenum.
  3. Raise the vehicle.
89116492

  1. Install the oil cooler outlet (1) line to the engine block. Tighten the oil cooler outlet (1) line to 30 Nm (22 ft. lbs.).
  2. Install the oil cooler inlet (2) line to the engine block. Tighten the oil cooler inlet (2) line to 30 Nm (22 ft. lbs.).
  3. Install the oil filter housing to the engine block. Tighten the oil filter housing to 45 Nm (33 ft. lbs.).
  4. Lower the vehicle.

Posted on Dec 24, 2014

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replaced the oil cooler twice last year whats the reason for giving in so quicly


Is this the engine oil cooler, or the transmission oil cooler?
In any case, the transmission oil cooler, which goes in front of the radiator, is made of aluminum and is very delicate.
It can be very easily damaged by rocks, sticks, or even vibration.
The engine oil cooler, however, should not have to be changed "forever" unless it is defective, or is wrongly installed.
Without sounding a smart-alec, all car makers have some parts on all models that have problems, and are most often re-designed after a few years if they turn out to be "not-so-good".
God bless your efforts.
(From a veteran retired MB parts dealer.)

May 21, 2018 | Cars & Trucks

1 Answer

SE. How do I remove transmission oil cooler line?


How To Install Replace Transmission Cooler Lines 2001-06 ...

? 5:45
https://www.youtube.com/watch?v=SFEXmxxBMK8
Oct 31, 2013 - Uploaded by 1A Auto Parts
How To Install Replace Transmission Cooler Lines 2001-06 ... In this video, 1A Auto shows you how to remove, replace and install leaking or broken Transmission Cooler ... How To Install ReplaceDo a Front Brake Job 2001-06 Chrysler ... 2003 Dodge Ram 3500 trans cooler replacement how to 11-24-12 ...

Search DODGE MAGNUM Cooling > Transmission Oil ...

www.factorychryslerparts.com > ... > Transmission Oil Cooler, and Lines
DODGE MAGNUM Cooling > Transmission Oil Cooler, and Lines. ... Please let us know what we can do to achieve this goal. ... Our inventory covers the following years of MAGNUM: 2005, 2006, 2007, 2008, ... Click X to remove the keyword.

Leaking Transmission Cooler Line Replacment Recommendations ...

www.dodgeintrepid.net > ... > General Discussion (First Generation)

Dec 12, 2015 | 2006 Dodge Magnum

1 Answer

Can you replace the power steering oil cooler by removing the grill, etc going through the front? Or do you have to remove the radiator, AC, power steering condenser to replace the PS cooler?


The PS cooler on many cars is much smaller than the radiator and "universal" replacements can be installed anywhere - even in front of the radiator. So, if you can disconnect / cut the lines to the original without any trouble - I'd do that and install the replacement where convenient. If you're replacing with the OEM cooler, then you'll need to be more careful and take it out properly. Which cooler do you have? Year, make & model vehicle?

Jul 24, 2015 | Cars & Trucks

1 Answer

Where is the oil cooler, cooler/coolant sensor and heater return line located related to replacing the radiator?


Without knowing your make/model/year of car, all I can offer you is a generic answer.
Oil cooler is typically in the bottom of your radiator.
Temp sensor is typically on the engine block.
Heater lines are often on the block, too.

Jun 07, 2015 | Cars & Trucks

1 Answer

Oil leaks pour from my Oil cooler right above oil filter when I start driving


The oil is most likely leaking from the oil cooler seal. The oil cooler is the square aluminum piece that the oil filter screws onto. To replace the seal, remove the filter, remove both coolant hoses that attach to the cooler, remove the nut that secures the cooler to the block and slide the cooler off the tube. Replace the rubber o-ring seal which is available at the VW dealer. It's inexpensive. Replace everything in reverse order. Good luck

Jan 03, 2011 | 1997 Volkswagen Jetta

1 Answer

Oil is leaking between the block and the oil filter housing, how do i take of this problem


I'm not sure what year or model your car is, but if it looks like the picture below then this is what you do.
The o-ring behind the engine cooler is leaking and need to be replace.
1.remove oil filter. You might want to use a new filter.
2.there's 24mm nut(i color it red in the picture). Use a socket to remove nut. Note:the nut and tube that the oil filter screw onto is one piece.
3.pull the cooler away from the block and there should be a o-ring behind the cooler, replace o-ring and reinstall.
k42282_26.jpg

Dec 21, 2010 | Honda Odyssey Cars & Trucks

1 Answer

Oil in expansion (coolant) reservoir Golf 1.4 98


replace the oil cooler first before you change the head gasket ,but normally a 10 year old vehicle often has gasket fatigue ,not made like a good old fashioned copper head gasket ,they rarely went wrong

May 11, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

My intercooler is leaking oil


Intercooler is for a turbo charged or supercharged vehicle

you must mean your oil cooler you probably need to replace some clamps or the oil cooler lines they tend to break or become brittle after many years of use unless you hit something and cracked it. good luck

Sep 24, 2009 | 2002 Audi A4

1 Answer

Egr cooler repalced to get us passed warranty - oil cooler was not replaced prior to 160k warranty exipred- on vacation 2000kms away (only 11000kms after egr cooler fixed) from home towing a trailer...


If the dealer put an egr cooler on and didnt replace oil cooler, it can blow out egr cooler again , restriced oil cooler causes egr cooler to blow out , which in turn can cause overheat and blown headgasket also, if you are seeing white smoke now it is possible for the egr to be blown out again as wel as the oil ooler and/or headgasket

Aug 03, 2009 | 2005 Ford F 250 Super Duty

1 Answer

How to replace oil cooler f250


drain oil from drain plug, take off oil line inlet from cooler, have bucket ready for oil. take off oil line outlet and undo retaining bolts, take off cooler.
put on new oil cooler, connect oil lines. might as well replace oil filter. add new oil.
done

May 11, 2009 | 1992 Daihatsu Charade

Not finding what you are looking for?
2001 Cadillac Catera Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...