SOURCE: Hazard Flashers, turn signals and brake lights quit working
please check your flasher relay. it is normally a three prong relay box.
tnx 4 using fixya,
drcool
SOURCE: 1998 Ford Ranger XLT turn signals, hazzard flasher not working
wire plugin on back of turnsignal switch not making a connecting
SOURCE: My turn signals on my
Replace the flasher unit, it is usually located on or near the fuse box, if this fails it will disable the turn signals.
Hope this helps
Ed
SOURCE: no turn signals but flashers work
You may have two relays one for hazards and one for turn indicators.
SOURCE: MY TURN SIGNAL QUIT WORKING IS THERE A FLASHER
My service manual states that the '02 T+C has a combination turn signal/hazard flasher/daytime running lights module which is located on the junction block, adjacent to and left of the steering column. To access it, you must remove the steering column lower cover and knee pad panel. There is also a fuse for turn signal/hazard flasher. If none of them work, check the fuse 1st.
260 views
Usually answered in minutes!
×