Right turn signal blinker doesn't work
SOURCE: right read blinker/break light dont work, turn signal blinks rapidly
It's the bulb. There are two filliments in the bulb. One is for when you turn your lights on and the other is for breaking and blinker flashing. When the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would work.
SOURCE: 2002 Chevy Impala Turning Signal Lights
could be fuse or turnsignal relay, look on theb ack panel of your fuse box, which is inside the car. it should be there like a 25a fuse...the trunsignal relay is under the dash it looks loike a lil-canaster with a plug in it.....replace this if the fuse in the fuse box is good, you may also have one unde the hood in the relays/fuse boxx, it will also have a diagram of fuse locations/functions on its lid. just look close
SOURCE: 2005 CHEVY IMPALA TURN SIGNALS AND HAZARDS DONT
replace the switch on the dash for the hazards the flasher is built in with the switch for the signals
SOURCE: I have a 2005 Chevy Colorado. The right rear
I have this exact same issue with my 05 Colorado and its so annyoying (not to mention unsafe)... I thought it was just the blub- becuase in my case my signal is no loger blinking. My break light still works, as does my parking light...
Any thoughts as to why this is happening?
Please HELP!!!
SOURCE: how to replace turn signal switch
you will need to pull steering wheel you have a clock spring for the air bag behind it dangerous for a on trained technician simply put the air bag could kill you
220 views
Usually answered in minutes!
×