SOURCE: 1988 Wrangler Ignition Switch Removal
There are four (sometimes two) bolts that hold the steering column to the dash. remove them & column will come down to let you get in there.
follow instruction sheet with switch. if you don't get it centered correctly it wont work correctly.
SOURCE: removing seats at the back of my Jeep wrangler
Hi Roger,
It's done from behind the vehicle.
Open the gate. At the base of the seat, there is a horizontal bar that releases the rear seat latches. Pull it up while pushing the seat forward.
When it's at an angle you can manage, Pull it up and out the tailgate. Not a bolt in site
Best regards
Mike
SOURCE: I bought a used jeep 2005 wrangler unlimited that
Also try http://www.etrailer.com/faq-wiring.aspx. They have easy to follow directions and color codes. Plus you can order anything you might need. Hope this helps.
SOURCE: 2005 Jeep Wrangler Unlimited cruise control will not engage.
check the vacuum line on the right side of the engine. There should be an elbow connector connecting the line to the engine. Does interior fan only come out of the defroster vents by chance?
SOURCE: 1995 jeep wrangler, Headlight problem
You have a bad Head Lamp switch in the dash,It's over heating and the internal breaker is shutting the H/L's off!
209 views
Usually answered in minutes!
×