<!-- from fixya rte -->How do I reset my 1998 Oldsmobile Intrigue - 1998 Oldsmobile Intrigue

SOURCE: 1998 olds intrigue trouble code p0171

I have a dianogstic machine and the code you were given indicates that the system is too lean. (Bank 1) Were you go from here i'm not too sure. Steve

SOURCE: parts need to change to preform a tune-up

usually spark plug ,rotor..under distributor cap..maybe new distributor cap depending on the wear on the inside contacts fuel filter..hope this helps

SOURCE: how do i install a 1998 oldsmobile intrigue water pump?

you need to go buy a Chilton. There is a litle more to it than telling you a couple of things on a web page. Also if your car has a 4 cylinder and you are replacing the water pump, something they don't tell you is you have to replace the timming belt also. If you don't you will be replacing them both again in a couple of months.

tepfy

SOURCE: i have an 1998 Oldsmobile

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then pull back the weather seal and you will be able to put it back on the track. You will most likely need to buy some clips to secure it back on

SOURCE: 2002 OLDSMOBILE INTRIGUE GX engine light on

There are many emission sensors in the car that will make the engine light come ON. Not to mention the big list of trouble codes for the engine light.


Best way to find out what's going on engine light is to have an auto-parts store hook up a engine code reader and tell you what the code means and the problem. Most auto-part store will do this for free.