Only fires on 1 cylinder chevy 5.0 1500 truck 1997

SOURCE: truck would not start, installed fuel

You may want to check your wires. I would also recommend to check for 6-12V w/ DIGITAL multimeter@ TPL and Idling sensor, right under intake manifold. If you have questions let me know I don't have the schematics for the connector w/me right know, but can e-mail them to you if you still have the problem. I had a similar problem as well.
[email protected]

SOURCE: need to know firing order

1 8 4 5 6 3 7 2, dist goes clockwise and the cylinders are labeled 1 3 5 7 on one side from front to rear and 2 4 6 8 on the other. The side that the cylinder head is most forward(toward the fan) is the lead cylinder(#1). I believe it is on the driver's side.

SOURCE: firing order for 98 chevy s-10 truck 4 cylinder

Here you go.

SOURCE: Need firing order for a

1-8-4-3-6-5-7-2 is the firing order it rotates clockwise and #1 on the cap usually faces towards cylinder 1.number 1 cylinder is the front cylinder on the drivers side of the motor and it goes 1-3-5-7 front to back on that side of the motor.and 2-4-6-8 on the passenger side of the motor front to back.

SOURCE: need firing order and number

The cylinder numbers are 1-3-5 front to back on the drivers side, and 2-4-6 front to back on the passenger side. The distributor cap is numbered, just follow the numbers.