Accent 1998 LS airbag light blinking 5 times and stay on.

SOURCE: 2000 2 door accent removed

you have to reset the ecm code , when you removed the fuse the ecm registered this as a loss of voltage and threw a code so now it doesn't know that the fuse has been replaced. you need a scan tool to reset the ecm...please rate the solution...thanks

SOURCE: the airbag light came on and stayed on for no reason.

I have the same issue (which comes and goes often).
It is caused by a loose wire connection, used for the drivers side airbag located in the seat.. The connector for mine is located under the front drivers seat. There are a couple of connectors that are connected to a bar under the front of the seat. I don't recall which one is used for the Airbag sensor.

SOURCE: airbag light stays on, fuses ok.

The airbag light will come on and stay on as long as there is an active code in the system. It will go off when the code goes to stored. Active means, something is malfunctioning right now so we will turn the light on. Stored means, something malfunctioned but is working now so we'll store the code in memory and turn the light back off. You really need to have the codes checked for an accurate diagnosis.

SOURCE: Suzuki 2004 XL7 airbag light on and clock flashes

My suggestion is to take the vehicle to the franchised Dealer where they will have the proper test equipment to identify the fault. I understand your concern about keeping the costs down and so what I’d do is telephone at least two Suzuki Dealers and ask them for a cost to diagnose the problem – you might wish to say to them that you have a fixed budget of say $100. At least this way you can be told what the problem is and what the rectification cost is likely to be. At that point you can choose to either proceed with the work or not. Hope this helps, Scottech

Testimonial: "Appreciate the advice and quick response, thank you."

SOURCE: 1998 frontier abs light airbag light

i know all about the vegas heat. i live in henderson. the alternator is going out. the regulator is internal so you have to replace the whole alternator.