Locate fuse
SOURCE: location of knock senor on 97 maxima se
Your knock sensor is located Under the hood, center, front engine area, below intake
manifold, mounted on block.
A defective knock sensor may cause engine detonation or reduced
spark advance and fuel economy. When a knock sensor is removed and
replaced, the sensor must be tightened to its specified torque. If the
knock sensor is installed tighter than it should be, it may become too
sensitive and provide an excessively high voltage signal, resulting in
more spark ****** than required. When the knock sensor is installed
looser than it should be, the knock sensor signal will be lower than
normal, resulting in engine detonation.
To replace the knock sensor:
SOURCE: 03 ford explorer cruise control stopped working
If I don't remember bad, check the position 15, fuse 15AMP (mini fuse) underdash fuse panel.
Hope solve your problem (remember rated this help).
SOURCE: where is the fuse located for the cruise control
there you go,thank you for using FixYa.com, Lee
SOURCE: the cruise control on a 97 s10 blazer is not
it generly works thru the brake light fuse, you prob have a vaccume leak causing it not too work!!
Testimonial: "very helpful information i sure am glad there are people out there that are willing to take time out of their day to help with these problems"
560 views
Usually answered in minutes!
×