Remove the brake parts,axle nut if there is one
& four bolts holding the wheel hub bearing assy
on to the steering knuckle
If you have no tools or vehicle experience, your done
Be nice to know why you ask, or if you work on vehicles
When folks ask how to questions, there is a reason,no tools,
no experience & hate & do not trust repair shops
All you have to do is watch the You Tube Video
that simple
SOURCE: No transmission fluid Dipstick on my 2007 Ford Fusion
depending on which trans it is there is a small dipstick on the trans at the front on the bottom these transmissions take a specific fluid so be careful
SOURCE: How to replace front wheel bearings on a 2001 Ford Escape 4X4
try "autozone.com" or your local library for diagrams and step by step instructions
SOURCE: can you replace rear wheel bearings ford explorer
You can replace the bearings. They are available here:
http://www.rockauto.com/catalog/x,carcode,1119697,parttype,1672
You should also be able to buy them at your local parts store.
I recommend buying the Haynes manual. It will help a lot with vehicle repairs
SOURCE: Ford fusion 2007, blown blower fuse, replaced
hte blower resistor is shot, near the blower motor, have the blower motor checked my guess is that it requiring too much power to run, hence the blown fuse
SOURCE: I replaced hub on front axel but the noise is
It sounds like it is a front end suspension problem. The following should be checked: upper and lower ball joints, the sway bars links, and even the shocks. Replace what is problematic, and your front-end noise should disappear, if it is a front suspension problem. Hopefully, this will FixYa problem!
484 views
Usually answered in minutes!
×