2003 Chevrolet Venture Passanger Logo

Related Topics:

A
Anonymous Posted on Sep 26, 2014

Information about fuses for 2003 chevy venture

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 17, 2008

SOURCE: Thermostat in a 2003 chevy venture van

the bottom boult is hard but can be done need to use a 10 or 12 stubby wrench and take a pry bar and lighty pry heat shild away to get bottom bolt dont need to take it out all the way just loosen and slide down

Ad

Anonymous

  • 1 Answer
  • Posted on Jan 27, 2009

SOURCE: Thermostat in a 2003 chevy venture van

no you dont need a special tool you have to take the throttle body off it makes it sooooooo much more simple.

asetech74

Ed Warden

  • 218 Answers
  • Posted on Mar 10, 2009

SOURCE: 2003 Chevy Venture - Horn has started randomly

Chances are you have a faulty clock spring in the steering wheel, you will most likely need to have it replaced.

nathan

  • 634 Answers
  • Posted on Jul 16, 2009

SOURCE: coolant fan temp sensor location on a 2003 chevy venture

located in thermostat housing or in intake nearby (where top hose connects from radiator to engine)

Anonymous

  • 490 Answers
  • Posted on Sep 26, 2009

SOURCE: front windshield washer doesn't work but rear

either the hose to the spray nozzle of the nozzel itself is plugged up
unhook the hose to the nozzle and blow thru it with compressed air

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 2003 Chevy venture wont go up into third or higher gears but will whine like it's in neutral until the idle goes down by taking foot off accelerator. It will usually go into higher gears then.

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few . reliable-store
let me know if u need help
thanks
0helpful
1answer

Why did my lights quit coming on automatically on my 2003 chevy venture

have you made sure the connetor is pushed fully in and that you haven't knocked other connectors making them loose ? also check for the fuse for day time running lights your owners hand book will tell you which fuse it is
0helpful
1answer

Where is the fuse for my interio lights in my 1999 chevy venture?

Instrument panel fuse block is located on the passenger's side of the instrument panel.
0helpful
1answer

Wondering if my chevy venture 2003 speedomiter has a fuse or cable it has stped working.

it is controlled by a cable that runs from the back of the speedometer to the transmission check connection at both ends and replace.
0helpful
1answer

I have a 2003 chevy venture and the winow on

No more fuses,General Motors had alot fo problems with power window motors I personally have replaced hundreds of these in all there models over the years.Sometimes if you tap on the motor with the door panel off while depressing the switch the motor will move again for a while but it will need to be replaced. Just make sure you have switching voltage and ground at the motor connector with the switch depressed.Good luck
2helpful
1answer

2003 chevy venture fuse chart

This vehicle has two fuse blocks. One under the hood and one on the right side of the dash. The covers have the fuse positions labeled and this information is also in your owner's manual.
0helpful
1answer

Front windshield washer doesn't work but rear washer does in 2003 chevy venture and the fuses seem to be ok

either the hose to the spray nozzle of the nozzel itself is plugged up
unhook the hose to the nozzle and blow thru it with compressed air
2helpful
1answer

2003 Chevy Venture - Horn has started randomly honking. Had to pull fuse to shut off. How can I fix this?

Chances are you have a faulty clock spring in the steering wheel, you will most likely need to have it replaced.
0helpful
2answers

Chevy Venture power windows- 2003

It is possible that it is the fuse but if so something caused the fuse to blow. It may be in the wiring which if you pull up the carpet by removing the door floor trim and lifting the carpet you will see the wiring underneath. Probably laying in water. Look for splices in the wiring which will have corroded. Repair the wiring then replace the fuse.
Another problem may be in the motors found inside the doors. The brushes may have worn out. If so you need to replace the motors. Unlikely that both motors failed at the same time though.
Usually the drivers door first since it is the most used.

Not finding what you are looking for?

275 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...