Lexus GS 300 02 code po2026 - 2002 Lexus Gs 300

https://www.google.com/search?q=power+steering+reservoir+located+on+2008+lexus+gs+350&rlz=1C1QJDB_enCA643CA644&oq=power+steering+reservoir+located+on+2008+lexus+gs+350&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

africa, is it the VSE LIGHT only or is it with Engine light as well? iF SO you will have to get OBED code to know what the cause is.

You would need to fix the problem, then have the computer re-scanned to erase the codes.

I looked at a few of the codes, my suggestion would be to clear the codes and see how many come back a second time.
Most are for parts in the ABS system, I doubt all of them are faulty at the same time. Could be a wiring problem or something with the ABS module.

On this website (link below) you find fuse box diagram and description for for Lexus GS300 (1998 - 2000)

Lexus GS300 1998 2000 fuse box diagram Auto Genius

Your throttle position sensor might be stuck on the wide open throttle setting!

Do you have any check engine codes? Is the check engine light on?

It might not be if the TPS is still in the normal range...but is just sticking open.

you need to find the sec(urity) code for the unit.first owner may have written it down ????

if it drives fine off idle then I would suspect the Idle air control valve.
If its hard to start unless you put your foot slightly on the gas then again I would suspect the IAC

you have to enter code #, look in manualy they will give instructions on how to enter code also there is a card with radio code. if card is lost call dealer with cars id # and they may be able to give you the code, good luck.

For the 1998 Lexus GS 300 3.0 liter DOHC

Firing Order:
1-5-3-6-2-4

Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)