I changed the spark plugs, the wires, the distributer cap, and rotor, and fuel filter. I just got the fuel rail back from being rebuilt and cleaned and it still runs rough????
SOURCE: running rough, spark plugs, distributor cap, rotor
First thing you need to know is which cylinders are missing. Then, don't forget there is an engine beneath the electronics. Do a quick test with a vacuum gauge and do a compression test. Check the distributor shaft for side play. If everything checks out good, then do electronic component testing. have a code check run (many parts stores do this free) and get a chiltons or haynes manual and follow test procedures in there.
I refrain from giving repair suggestions with problems like yours because people keep changing instead of testing parts. When I work on my vehicles or other peoples cars, I do testing to avoid buying expensive parts that most times won't correct the problem. At this point the most I'd suggest is to clean the mass air flow sensor wires with a Q-tip and carb cleaner...that often helps and is free. If you run into a problem with whatever you find, ask and I'll try to help.
good luck
Testimonial: "I followed suggestions, it did helped some what."
247 views
Usually answered in minutes!
×