The code is 0562 meaning a low voltage in the system but even with a fully charged battery the truck will not turn over. How can I fix this?
Possible causes-- Low battery charge
- Battery defective
- Loose or missing alternator drive belt
- Faulty alternator
- Open or short system voltage circuit
Start by checking battery voltage.
SOURCE: 2002 Dodge Ram 1500 ,4.7L V-8 Battery is not CHarging
A lot of Chrysler products have the voltage regulator in the computer. I would check the charging system wiring first for poor connections and if nothing else is found there is nothing else for you to do but change it.
SOURCE: Dakota 4.7 P0161 code? What does it mean
P0161 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)
check the wiring to the bank 2 sensor, that is the one behind the catalytic converter on the opposite side from the bank where #1 cylinder is located, see firing order diagram below.
SOURCE: 2001 dodge ram 2500 diesel with 6spd manual trans.
p0562 is System voltage low
p0237 is Turbo/supercharger boost sensor A circuit low
cannot find a code p1698 but did find a p0698
p0698 is Accelerator pedal position sensor supply voltage to low
SOURCE: 1993 Dodge Dakota repairs. Battery is charged and ...
I have a 93 dodge dakota pick up. When I turn the key I get nothing, The radio and the lights work fine. I had starter checked and the battery changed, It will run if you push it to start but not with the key.
SOURCE: how do you fix a
For us the code was from a corroded battery connection. We cleaned up the positive and the check engine light went away.
869 views
Usually answered in minutes!
×