Cranks but won't start-no sparks...needing detailed information on the ignition control moduler
SOURCE: 2000 Saturn SL2 - replaced ignition then BCM failed. Related?
the problem is not the bcm. the passlock security sensor is in the cylinder and housing, if the cyl and or housing was replaced the system must be relearned. if you replace the bcm you still need to relearn the system or it still will not start.
SOURCE: 2000 Silverado-4.3 ltre-cranks over-wont start-consistenly
Yes. First, in the fuse block under the hood check INJ A fuse and INJ B fuse. INJ A fuse is circuit 1039 which feeds the coil. If the fuse is OK, replace the coil electrical connector. I stock 2 of these at my dealership because they are needed quite often.
FYI P1351 is an ignition coil control circuit DTC.
SOURCE: How do I remove and clean an EGR valve for a 2000
well even if you try to clean the egr valve it will not work,the carbon gets up in there and you cant get in there to clean it out,also there could be other electrical issues inside the egr,,you need a new egr trust me i tried many times as a saturn tech to clean them and at most it lasts a week and your in the same boat,jus get one from autozone or something for much less,also the ignition module costs so m uch from saturn because it comes with both coil packs the aftermarket one most likely doe not come with new coil packs, either way i would get it with the coil packs,,but i would replace them both,they are common wear itmes ans the saturn s-series,,,
373 views
Usually answered in minutes!
×