There is a bracket which the fuel filter is protected and mounted to the frame of the SUV and it will not budge even with the nuts removed from the mounting bolts. Could there be something else preventing me from accessing this filter?
SOURCE: 97 Taras sedan SE style rear stut top bolt and nut location.
The top nuts are located from inside of the trunk. If you look behind the material that covers the wheel wells you should find the nuts near the top of the wheel wells.
SOURCE: replacing oil pump in 95 Cutlass 3.1L
YOU WILL HAVE TO REMOVE THE EXHAUST PIPE IN THE REAR.IT HITS THE FLOOR PAN.ALSO REMOVE THE TWO DOG BONE MOUNTS ON TOP IF THIS ONE HAS THEM
SOURCE: 1999 Buick Park Avenue water pump removal
The bolt holding you up is on the bottom by the compressor, right? You Will have to have an inverted torx socket to remove the studs. Also there is a spacer behind the mount bracket, remember where it goes. You will have to pull the pully bolts and get it out of the way too. Some of those cars have plastic elbows going from the intake to the water pump, be carefull with it. Your motor may not have this but be ready to replace it if it does because it will most likley break. Good Luck.
134 views
Usually answered in minutes!
×