SOURCE: rear struts
take the struts to a shop and have them mounted up. Dont rent a tool from autozone it will only kill you!!!!!!!!!!!!!!!!!!!!
SOURCE: rear strut?
Hey, Jessica, u might want to check out alldata website, or eautorepair, u can pay about what a manual costs for on line access to your cars manual right away, no waiting. U can print any info off the site for your car too. Let me know if u need more help.
SOURCE: changing a hub assembly on a 2007 chevy
Put in tighten bolts. Each bolt little at a time moving equally between each bolt. You don't want to overtighten one bolt to much and cause it to go in at an angle. Be sure that it's tight. Air tools are the best choice but if you don't have any take time and use a braker bar to make sure it's good and tight.
SOURCE: how do you change an oxygen sensor on 2006 chevy aveo
There is a special socket for O2 sensors which allow the wires to stick out and not get twisted up. It's not expensive and available at most auto parts stores. Disconnect the sensor from the wiring harness, with the plug and then use the socket to remove and replace the new sensor. Re-connect electrical plug.
Please rate this answer. Thank you.
152 views
Usually answered in minutes!
×