Had to replace the intake cam on a 2002 Saturn vue was wanting the valve clearance
SOURCE: serpentine belt 2002 Saturn Vue V6
The diagram to install the belt is under the hood near the engine emissions sticker, if not there near the belt.
SOURCE: knocking noise saturn vue
It's the vent solinoid on the fuel filler neck. It is self checking, it is perfectly normal.
SOURCE: egr valve on a 2002 Saturn SL1
Take off air breather tube,you should see a cone shaped part, on top and at back of engine right by the gas pedal cable. Remove the 2 10mm bolts, and it should come right off.
SOURCE: I just had my wheel bearings replaced on both
Vues are bad for having all hub bearings make noise,check your rear ones.Or the ones you didn't have replaced.If it's all wheel drive check the propshaft center carrier bearing.Common to fail & make noise.hope this helps
SOURCE: 2002 Sayurn vue 3.0L
Under the intake manifold, it will need to be removed. Not too hard to do for the average diy but recommend buying a repair manual as a guide. you will need a 1/4" drive T30 torx socket with a long extension one of the bolts is hidden but the others are under the black cover on the top of the intake. you will also need to remove the coil pack held on with torx bolts. 8 or 10 inverted torx socket needed for that.
222 views
Usually answered in minutes!
×