SOURCE: PCV valve location
if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.
SOURCE: where is the pcv valve located on a 2003 ford ranger
SOURCE: Where is pcv valve located on 2005 taurus
It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.
SOURCE: pcv valve replacement on 2003 ford escort
The valve is located under the thermostat housing facing the front of the car. There is very little room to work with here. You'll have to pull the hose up from the valve then pull the valve out.
203 views
Usually answered in minutes!
×