Can the engine be removed from the top, or does it come out the bottom with the K frame?
SOURCE: speed sensor removal 94 Mustang GT
Remove the trans cross member and let the trans drop down (use a floor jack), then you will be able to access it.
SOURCE: Engine Removal for 1991 Mustang GT
first of all take and un plug all wires to engine then take out radiator then unplug all hoses jack the car up and unbolt the trans and starter make sure all fuel lines or off then unbolt the header pipes now you can take the motor sports lose (note what kind of trans do you have ) if it is a auto you got to take the tork converter lose and once you done all that you can take the hood off then hook chain to engine then start picking up with a hoist but slowly you may need to pull engine from trans as you pull up on the motor watch for any wires or hose that you may didnt see to unhook if you need any more help just let me know good luck and be careful .
SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?
You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett
SOURCE: engine temperature sensor located on a 1998 Ford Mustang GT
Left hand side (if facing it), behind distributor, above oil fill.
SOURCE: 83 mustang gt
the regular gt had a 5.0 in it the only stang that had a 2.3 turbo was the svt mustang
83 views
Usually answered in minutes!
×