SOURCE: 1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location
the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.
SOURCE: pcv valve :where is it located on a 1999 ford explorer sport 2wd
It is located at the back of the engine near the fire wall. It is gray with a T connector at the top with two hoses coming off of the T and going forward into the intake manifold.
SOURCE: looking for a diagram of 2001 ford explorer sport
http://www.genuineservice.com/genuineservice/en/default?page=genuineService
Go to this site pick owner guide from left task bar and get the owners manual. Your fuse info will start on page 162
SOURCE: 2002 Ford Explorer Sport, diagram to add freon
there is a port and it takes r123a and it has a green port on it but if it's leaked out you mave have to have it vachumed out, if you charge it be sure to get R134a with oil so that you don't burn up the pump, when the thing leaks it loses oil.
SOURCE: need fuse panel diagram for 2001 ford explorer
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
free from ford
112 views
Usually answered in minutes!
×