I am wondering if anyone knows the torque for the main bearings and rod bearings for a 2005 dodge startus v6 2.7L automatic. Thanks!
Main bearing cap bolts there is a outer cap bolt that are torqued to 20 ft lbs + 1/4 turn. Then there a inner cap bolt that are torqued to 15 ft lbs + 1/4 turn. Con rod bolts are torqued 20 ft lbs +1/4 turn
SOURCE: What are the torque specs for 97 dodge stratus 2.5
Note: This info taken from Mitchel online:
Rods 21 Ft lb
M8 Bedplate bolts 25 Ft lb
M11 Main caps 30 Ft lb
Hope this helps.
Bob
SOURCE: what is the torque specs for 1992 Dodge Dakota
The main bearing cap bolts are torueed to 85 lbs
hope this helps
SOURCE: what are the torque specs for main and rod bearing
go to autozone.com and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need. Hope this helps!
SOURCE: NEED TORQUE SPECS AND SEQUENCE FOR 02 DODGE 2.4 V6 STRATUS
How do I know how to put the torque converte on the same holes like it was be fore to the fly wheel
718 views
Usually answered in minutes!
×