2006 Chevrolet Aveo Logo

Related Topics:

A
Anonymous Posted on Jul 06, 2014

Location of main fuse for central locking alarm

The car does not lock or sound when i press the lock key

3 Related Answers

frank_crab

  • 233 Answers
  • Posted on Jun 08, 2009

SOURCE: Remote Door Lock/Unlock will not work.

At first look, I would have guessed that your battery in the door opener was dead, but that is not the case. I suggest driving to a nearby Chevy dealer and ask one of the salesman if he/she can help. They have always been helpful to me. If not try another one as they are in business to sell not only cars, but service also. They will be your best bet to fixing it. :D

Ad

Anonymous

  • 47 Answers
  • Posted on Mar 29, 2010

SOURCE: 2002 Camaro unlock and lock won't work

first check the battery in the remote. if it is good it could possibly be the body control module

Anonymous

  • 132 Answers
  • Posted on Apr 04, 2010

SOURCE: I bought a Chevy Trailblazer, used, had keyless

You need to find the black push button called the valet button. That is the overide. Get in the car turn the key to IGN as the alarm is going off and then you have either 5 or 10 seconds to push that button once and then 2-5 seconds later the alarm is shut off. To put the car into valet mode which means no alarm at all you put the key to IGN push that button once then pull key out at which point the blue light should turn solid blue.

Or option two is you open a door and hit the lock, then unlock, then lock button again on the remote and the blue led will be solid which means no crazy alarm.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi there key dont work

it could be a problem with the central locking unit. you would need to have the system red on a obd read that does this part of the vehicle, you could try to reset the system key in ignition turn to number 2, press fob doors should lock and unlock with the button pressed. as for the side door this is controlled by the front door on that side this door has to be locked and the pin moved in the lock to send the power to lock the side door. with the central locking not working on the system and you manually locking it it may not be going all the way to lock both doors. or the central locking is not working at all. the fuse for central locking is in the main fuse box.
0helpful
1answer

Mazda 2 (2004) central locking and alarm fault. My

how can i find central locking in mazda premacy tell me plsss
0helpful
1answer

Central locking wont work cant open it except drivers door with key only,but alarm still work with key fob.

put key in ignition turn key to number 2 lights on dash battery etc. then press the fob. till the doors lock then it is rest.
5helpful
3answers

Toyota corolla verso 2007 . the central locking has stopped working

Toyota Corolla Verso - Central locking has just stopped responding


So you don't waste your time, here are some assumptions: -

1. When I press the key fob there is no sound of doors trying to lock/unlock and I know the key fob is fine.


Solution:


In this situation reset the alarm/locking system

Below is the procedure I followed to get the central locking working again: -

Open the passenger door, and look at the side of the dash board. There should be a triangular panel. Pull the panel off to reveal a small set of fuses(see the back of the panel for the fuse map). To power down the central locking you need to remove the Dome Light fuse, this is located top left. Second one down 7.5 amps. (if in doubt remove the top two 7.5 amp fuses I did)

When you remove the fuse(s) you will notice the interior light go out indicating you have powered down the system.

Now leave them out for at least 30 mins so any capacitors can discharge properly. (Be aware while the fuse is removed all central locking is disabled, so the other doors are open. I left the fuse(s) out over night with all the doors open but I don't recommend it, 30 mins should be fine)

After 30 mins replace the fuse(s) close all doors, and then try your key fob, hopefully you should here that satisfying locking sound.


2. When I press the key fob I hear the locking system trying to engage.

This could be a faulty door switch on any door including the boot, or there could be a dent in the inner door panel of any of the doors, usualy the rear doors due to the seat belt not retracting properly.

Solution:

Check all door switches for damage, and check inner panel for dents, just a small dent where the switch connects can be enough to not engage the switch. This will stop the central locking.

Use some kitchen roll wrapped in tape (as a makeshift pad) and tape to the inner door as a temp measure to engage the door switch. At least you can then lock the car.


5helpful
1answer

Central door lock system not working

CHECK THE DOOR LOCKS MAIN FUSE.
0helpful
2answers

730d sport 04. I lock the car with remote key, but when i try the doors the car opens.. no alarm nothing..

When you press lock you should hear central locking click.
If you don.t the remote battery is flat.You can not change battery,it charges in ignition as you drive.Have you got a second key to try.
If not use manual key located in remote key{check ln owners manual}to lock car.Also using this key will confirm central locking is ok.
good luck barry.
3helpful
2answers

Remote central locking not working on Honda CRV 1999. central locking works with Key and the alarm and imobliser work form the remote.

Hi I wonder if you can advise me ,my central locking and alarm is very unreliable it keeps making a beep before the ignition goes on and clicking,it sometimes sets the alarm off,Ive had the AA round and theyve told me the car battery is dead,which I appreciate,but think the key hub central locking or alarm is running the battery low does the hand held button need a new battery,or can I take the fuse out for the central locking,dont want to pay 66 quid for a new battery if I can pay 2 quid for a new battery for the central locking button,or demobilize it
0helpful
1answer

Can not lock car by key remote . toyota rav 4 53 plate

If your car has an alarm with a separate remote, it is a separate system and it is probably self-arming. When you lock the doors with the key central lock, the alarm gets armed by the RAV4 being OFF and the door locking action. When you unlock the doors with the key, the alarm is still armed because the key is not comunicating with the alarm just the cars factory keyless system.
0helpful
3answers

Cow boy alarm fitter came to fit alarm.When came to pick car up cenral locking did not work. he didnt no what he had done. So i had my car back with out paying 3 days later . I have now taken alarm of...

Try to check wires to the driverside central lock master motor. alarm installer probaly cut wires inorder to link the alarm to your cars central locking system.

Central lock master motor usually comes with 5 wires, two is the motor supply wire capable of reversing its polarity depending on lock or unlock request, the remaining 3 is just a swtich. One is ground and the two are negative request swtich for lock and unlock. If all fuses were good this moght be the problem, try also to check the outside fuses- in the hood. Good luck!
0helpful
1answer
Not finding what you are looking for?

437 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...